What Is An LVLP Spray Gun?

First and foremost, LVLP stands for Low Volume, Low Pressure. The LVLP Spray Gun is a unique type of the spray guns which is specially designed in a manner to use a lower volume of air to atomize the paint at the cap. LVLP compensates for the lack of air with a precision air cap. Hence ideal for using with water-waste materials, the project you are doing will come out cleaner, and the paint is sure to look sharper. As its name suggests, this unit is a low volume, low-pressure spray gun which is usually used to paint small areas only.

Since it is only a small volume of air used, LVLP guns can be operated with a much lesser CFM as well as a small compressor. LVLP operates at less than 10psi at the nozzle cap as compared to the HVLP which can be exploited at 10psi at the air cap. As you can see, LVLP has a better transfer efficiency of over 70 to 80% (5 to 10% higher than the HVLPs) of putting the coatings onto the surface being coated. Thus meaning minimal overspray will be produced – this saves you on paint cost as well as environmental hazards.

If you are looking for a high-quality and lightweight unit that will help in your small projects, then the SPRAYIT SP-352 Gravity Feed Spray Gun with Aluminum Swivel Cup is an excellent choice for you. This unit features a lightweight aluminum gun body with the 13.05-ounces/0.4 liters aluminum cup – this makes working with this LVLP spray gun quite easily.

The aluminum swivel cup enables you to rotate the spraying gun to spray even hard to reach places. The SPRAYIT SP-352 comes equipped with a separate and adjustable fan pattern as well as air controls which allows you to fine-tune the spray gun for precise application. This means you will control the paint that comes out from the gun hence avoiding any overspray on the surface.

Another impressive thing about the SPRAYIT SP-352 spraying gun is that the stainless steel fluid and nozzle are corrosion resistant. Hence making the unit durable enough to last for quite a long time.

The SPRAYIT SP-352 features an air consumption of 4.2 to 6.0 CFM at 30 psi. Also, this spraying gun has a working pressure of 44 to 58 psi and has a maximum pressure of 60 psi. Additionally, the unit provides a fan pattern of 5.5-inches to 7.5-inches.

It comes included with a one-year limited warranty against the manufacturer’s defects. This Gravity Feed Spray Gun can be used for a variety of different applications like industrial, automotive, marine, and woodworking.

Pros

  • It is lightweight hence you can spend hours painting without your hand getting hurt.
  • The spray gun is fully adjustable.
  • It is economical and time-saving.
  • It is excellent quality.
  • It is affordable.

Cons

  • The paint can is not clear hence tough to know the level of the paint remaining.
  • It doesn’t have a screw on the lid.

 

SPRAYIT SP-33000K LVLP Gravity Feed Spray Gun Kit

Paint SprayerThe SPRAYIT SP-33000K LVLP Gravity Feed Spray Gun Kit is a fully complete paint spraying kit which you would want on any indoor and outdoor operations. Being operated under the tag of low volume low pressure, it is suitable many applications like woodworking, automotive, industrial, and marine.

This spraying gun comes featuring lightweight aluminum construction which makes it thin enough to spray for extended periods of time without feeling tired so quickly. Additionally, the SPRAYIT SP-33000K comes packed with a 20-ounces/ 0.6 liters plastic cup which makes working with this spray gun pretty easy.

Another impressive about this LVLP spraying gun is that it comes equipped with a stainless steel fluid nozzle and needle which are corrosive resistant. Hence robust enough to last for quite a long time without getting damaged. Additionally, the SPRAYIT SP-33000K comes included with separate and adjustable fluid fan patterns and air controls. Hence reducing overspray and allows you to make fine adjustments for the more precise applications. This means less waste thus very economical.

The SPRAYIT SP-33000K features an air consumption of 3.5 to 3.9 CFM at 30 psi. Another impressive thing about this gun is that it has a working pressure of 28 psi to 45 psi and a maximum working pressure of around 60 psi. The fan pattern control enables you to preoccupy anywhere between 7-inches to 10.9-inches.

This kit comes fully complete with a SPRAYIT SP-33000K spray gun, air regulator, 1.3, 1.5, and 1.7mm spraying tips, and cleaning kit. It also comes with a plastic carrying which makes easy to transport as well as conveniently storing it.

Overall, the LVLP functioning means that you can use less volume of air and can, so you can equip a small compressor for the right desired results.

 

Pros

  • It is highly comfortable and lightweight – allowing you to spend long hours painting.
  • The gun is excellent quality.
  • The gun is fully adjustable.
  • It has stainless steel needle and nozzle.

Cons

  • It is highly priced.

 

SPRAYIT SP-33500K LVLP Gravity Feed Spray Gun Kit

SPRAYIT is a well-known brand name as you can be assured you are getting high-quality products in its price range. The SPRAYIT SP-33500K LVLP Gravity Feed Spray Gun Kit is another high-quality SPRAYIT LVLP gun kit that offers high performance in smaller jobs. It is ideal for industrial, automotive and woodworking applications.

The spray gun features a lightweight aluminum construction hence making the gun weighing no more than 20 ounces along with its plastic cup. The 0.6 liters plastic cup for paint material is enough keeping in mind the low-volume low-pressure technique is being involved. It comes complete with stainless-steel fluid needles and nozzles included, and the impressive part is that they are corrosion resistance.

The fluid fan pattern and air controls are all fully adjustable so you can use this spray gun in different smaller parts for precise results. The SPRAYIT SP-33500K mini spray gun is perfect for details and smaller projects, unlike its cousin SPRAYIT SP-33000k, which is ideal for larger surfaces. When the two are combined, you will have what you want to tackle any project.

The working pressure of this spray gun is around 30psi to 45 psi. The SPRAYIT SP-33500K has a maximum working pressure of approximately 60 psi. Additionally, you can achieve a fan pattern ranging from 4-inches to 10.9-inches.

Pros

  • It is durable, thanks to its stainless steel fluid needles and nozzles.
  • The gun is fully adjustable hence reducing overspray allowing you to spray larger surfaces without having to stop.
  • The sizes of the fan pattern are a bit large, 4-inches to 10.9-inches
  • It is very comfortable and lightweight.
  • The finishing is very smooth.

Cons

  • The gun is highly priced.

Astro EVOT13 EuroPro Forged LVLP Spray Gun with 1.3mm Nozzle and Plastic Cup

The Astro EVOT13 EuroPro spray gun is one of the best LVLP spray guns you are going to find on the market today. This LVLP spray gun comes fitted with a forged body which makes the unit durable enough to last for quite a long time.

Additionally, this spray features anodized corrosion protection which also enhances the longevity of the equipment. The internal workings of the unit are coated which ensures the tool’s long life.

The stainless-steel needle and fluid tip feature a slick finish which makes cleaning them faster and easier. The enhanced Air Curtain design minimizes the overspray and pollution thus enabling most exceptional atomization as well as transfer quality. Additionally, the spray gun features quick-thread technology which allows ease of use and makes it compatible with most traditional and disposable cup systems.

The soft trigger is simple to pull and won’t wear out your hand. Also, the adjustment knob on the unit is well-lubricated hence providing you the full control over its functioning. The innovative CNC machining prevents the need for gaskets behind the fluid tip.

The spray has air consumption of 11.5 CFM to 13.5 CFM. Also, it comes featuring a working pressure of 15 psi to 19 psi. The width of the fan pattern is up to 10.25-inches.

Pros

  • The gun is fully adjustable.
  • It is very comfortable and lightweight.
  • The stainless-steel needle and fluid tip and forged body make it durable enough to last for quite a long time.
  • The slick finish makes it easy and faster when it comes to cleaning it.
  • The gun is pretty easy to operate, thanks to its quick thread technology.

Cons

  • It is expensive.

 

SPRAYIT SP-31000 LVLP Siphon Feed Spray Gun

This is another excellent product from the SPRAYIT that you should also consider. It is ideal for automotive, home, and furniture applications. The SPRAYIT SP-31000 comes featuring a lightweight aluminum body with a 1000cc aluminum cup which makes it easier to work with for long hours of painting without getting tired quickly.

Another impressive thing we liked about this spray gun is the air controls it offers. The air controls provide you full control of the amount of paint coming out of the nozzle hence making it ideal for perfect application every time. Additionally, it comes equipped with separate and adjustable fluid for a more precise fan pattern.

As with other LVLP spray guns from SPRAYIT, the SPRAYIT SP-31000 features stainless-steel fluid needle and nozzle which makes the unit durable enough to last for quite a long time. The best part about the stainless fluid and nozzle is that they both corrosion resistant.

What we liked more about this spray gun is that you can use different materials including both thicker and thinners coatings including lacquers, enamels, stains, urethane, and low-viscosity paints.

The SPRAYIT SP-31000 features an air consumption of 3.5 CFM to 3.9 CFM at 30 psi. Additionally, this spray gun has a working pressure ranging from 28 psi to 45 psi. It has a maximum working pressure of 60 psi. With this spray gun, you can achieve a fan pattern ranging from 7-inches to 10.9-inches.

Another impressive thing you will like about this gun is that it comes with a 1.5 mm spraying tip, and also the package comes included with an extra spanner, brush, and a socket. This means you can get started right away when you receive the unit.

Pros

  • The gun is highly comfortable and lightweight.
  • It is fully adjustable for more precise applications.
  • It is very durable.
  • It comes included with additional parts – extra spanners, brush, and a socket.
  • You can use different materials.

Cons

  • It is expensive.
  • The range of the fan pattern sizes could be better.

How to Choose the Best LVLP Spray Gun

There are so many brands and models of LVLP spray gun available in the market today. So if want to pick the best LVLP spray gun, there are several factors you need to consider.

However, choosing the best LVLP spray gun is not a major challenge as most of them are based on the same design. You might want to consider a change in design or even material when it comes to using different material like water-based products.

Here are some questions you need to ask yourself before making any hasty decision:

  • Which products are you intending to be spraying? Water-based products?
  • What kind of size and needle are you going to require?
  • What will be the best fan pattern size for your project?

So you will have to figure out of ahead of time, whether the wide fan pattern or small diameter circle will work best for you since they all provide different sizes.

There are two type of the LVLP spray guns based on trigger action – bleeder and non-bleeder guns.

Bleeder spray guns have a constant air flow whether you pull the trigger or not. Thus resulting in a stronger stream and quick drying, and at the end, reducing the risk of the air cap becoming clogged. Overall, these spray guns enable slightly less control over the spray.

On the other hand, the non-bleeder spray guns are prevalent. When you release the trigger, the gun stops releasing air. Thus allowing for more control of the air and fluid being released. This makes it ideal in situations where untimely spraying is challenging. However, the major downside with non-bleeder guns is that there is more risk of clogging the air cup.

LVLP spray guns can be siphon feed (cup underneath) or gravity feed (cup on top). The significant difference between siphon and gravity feed is that gravity feed requires less air pressure and makes for a more straightforward design. As for the siphon feed guns, they are somewhat outdated and are preferable to the old-school painter or for particularly specialized coatings.

Create Account



Log In Your Account